How To Install Bose Solo 5 Tv Sound System

Owner's Guide

BOSE® SOLO 5
Tv Audio System

Delight read and keep all safety and use instructions.

Bose Corporation hereby declares that this production is in compliance with the essential requirements and other relevant provisions of Directive 2022/53/EU and all other applicable EU directive requirements. The consummate declaration of conformity tin can be constitute at: www.Bose.com/compliance

Of import Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Practise not employ this apparatus near water.
6. Make clean only with a dry cloth.
7. Exercise not block any ventilation openings. Install in accord with the manufacturer's instructions.
8. Do not install near any estrus sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the ability string from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they go out from the apparatus.
10. Only employ attachments/accessories specified past the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use circumspection when moving the cart/appliance combination to avert injury from tip-over.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in whatsoever way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

• To reduce the run a risk of fire or electric shock, do not expose this production to rain or moisture.
• Do Not expose this apparatus to dripping or splashing, and do not identify objects filled with liquids, such as vases, on or near the appliance.
• Go on the product away from burn down and oestrus sources. Do not place naked flame sources, such as lighted candles, on or nearly the product.
• Do Not make unauthorized alterations to the product.
• Do Not use a power inverter with this production.
• Do Not use in vehicles or boats.
• The speaker wire and interconnect cables included with this system are not approved for in-wall installation. Please check your local building codes for the correct type of wire and cable required for in-wall installation.
• Employ this product only with the power supply provided.
• Where the mains plug or appliance coupler is used equally the disconnect device, the disconnect device shall remain readily operable.
• The batteries provided with this product may present a hazard of burn down or chemical fire if mishandled.
• Do Not betrayal products containing batteries to excessive heat (e.g. from storage in straight sunlight, fire or the like).
• Just employ the mounting hardware supplied with this production.
• Practice Not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If you are non sure well-nigh installing the bracket, contact a qualified professional installer. Ensure the subclass is installed co-ordinate to local building code.
• Due to ventilation requirements, Bose does not recommend placing the product in a confined space such as in a wall cavity or in an enclosed cabinet.

Annotation: This equipment has been tested and constitute to comply with the limits for a Class B digital device, pursuant to Part xv of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and tin radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will non occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which tin be determined by turning the equipment off and on, the user is encouraged to try to right the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation betwixt the equipment and receiver.
• Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications non expressly canonical by Bose Corporation could void the user's dominance to operate this equipment.
This device complies with function 15 of the FCC Rules and ISED Canada license-exempt RSS standard(south). Operation is subject to the post-obit two weather condition: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference
that may cause undesired operation.
This Grade B digital apparatus complies with Canadian ICES-003.
CAN ICES-iii (B) / NMB-three (B)
This device complies with FCC and ISED Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antennas or transmitters.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Model: 418775

About your Television set sound organization

Your Television receiver sound system provides articulate, spacious sound from 1 compact soundbar.

System features

• Videostage® and TrueSpace® technologies deliver many of the benefits of a five- speaker home theater in a single soundbar.
• Sleek and elegantly designed soundbar fits easily in front of your TV.
• Connects with just 1 audio cable for easy setup.
• Programmable universal remote powers on/off your Television set, cable/satellite box and
• system with the printing of a single push button.
• Stream music from Bluetooth® devices.
• Stores up to eight Bluetooth devices in its pairing list.
• Connects up to two Bluetooth devices for easy switching betwixt devices.
• Mounting ring to hibernate the power supply backside your mounted TV.
• Soundbar can be mounted on the wall (kit available separately).

Unpacking

Carefully unpack the carton and confirm that the following parts are included:

*May transport with multiple ability cords. The appropriate ability string for your region is
supplied.

Note: If part of the system is damaged, do not use it. Contact your authorized Bose®
dealer or Bose customer service. Refer to the contact sheet in the carton.

Placing the soundbar

• Stand the soundbar on its feet in front of your Tv set.
• Do not identify your TV on the soundbar.
• Make certain there is an Air-conditioning (mains) power outlet nearby.

To avoid wireless interference:

• Keep other wireless equipment away from the soundbar.
• Place the soundbar exterior of and abroad from metal cabinets, other audio/video components and direct heat sources.

Sample soundbar placement

Wall mounting the soundbar

You can mountain the soundbar on a wall. To buy the WB-120 Wall Mount Kit, contact your local Bose® dealer or visit www.Bose.com
After wall mounting and setting up the soundbar, adjust the audio for better bass audio

Circumspection: Do not use whatsoever other hardware to mount the soundbar.

Cablevision options

Connect your Television set to the soundbar using one of the two digital cablevision options. The optical cable is the preferred method for connection.

Notation: If your TV does non have an optical or coaxial connector, see "Alternating Setup"
on page 27.

1. On the dorsum of your TV, locate the Sound OUT (digital) connector panel.

Note: Y'all must connect the audio cable through your Audio OUT
connector console.

two. Cull an audio cablevision.

Connecting your Idiot box

Insert ane end of the audio cable into the correct Audio OUT (digital) connector on
your Television set.

Caution: If using an optical cable, remove the protective caps from both ends.
Inserting the plug in the incorrect orientation can damage the plug and/or the
connector.

Connecting the soundbar

After connecting the audio cable to your Television receiver, connect the other cease to your soundbar.
Use simply i audio cable. For instructions on connecting a coaxial cablevision, come across page 16.

Pick 1: Optical cable (preferred)

CAUTION: Ensure you take removed the protective cap from both ends of the optical
cable. Inserting the plug in the wrong orientation can damage the plug and/or the connector.

1. Hold the optical cable's plug with the Bose logo facing down.
2. Marshal the plug with the Optical connector on the soundbar and insert the plug
   carefully.

Annotation: The connector has a hinged door that swings inward when inserting the plug.

three. Firmly push the plug into the connector until you hear or experience a click.

Pick ii: Coaxial cable

Insert the other end of the coaxial cable into the Coaxial connector on the soundbar.

Connecting to power

1. Plug the power supply into the Power connector.
2. Plug i finish of the power cord into the power supply.
3. Plug the other cease into a alive Air-conditioning ability (mains) outlet.
   The soundbar emits a tone.

Mounting ring

To hide the power supply behind your mounted TV, utilize the mounting ring. Attach the mounting ring to your TV's wall mount using zip ties or bread ties (not provided).

Turning off your TV speakers

To avoid hearing distorted sound, turn off your Tv set speakers. Refer to your Boob tube'due south owner's guide for more data.

Powering on your soundbar

1. Power on your TV.
2. If you lot are using a cable/satellite box or other secondary source, power on the source.
3. Press the Ability button ( ) on the remote command. The status indicator glows green.
4. Check if audio is coming from the soundbar.

Note: If you exercise not hear sound coming from the soundbar, run into "Troubleshooting" on page 33.

Confirming your TV speakers are off

1. Press the Mute button ( ) on the soundbar's remote control.
2. Check that no sound is coming from your Television set.

Note: If you hear sound coming from your Tv set, see "Troubleshooting" on page 33.

Remote control buttons

Use the remote to control sources continued to your system, adjust the arrangement book, change channels, use playback functions, enable cable/satellite box functions and navigate source menus.

Programming the universal remote

Y'all tin program the universal remote to control your source, such as a TV, DVD/Blu-ray Disc™ player, cable/satellite box, game system or DVR, by inbound the code for your source's brand. At that place may exist several codes for your source. Y'all may need to perform this procedure multiple times to locate the correct code.

solo_5_PDF_remote_codes [pdf]

Customizing the power push

You lot tin can customize (ability push button) on your remote to power on/off your soundbar,
Idiot box and cable/satellite box simultaneously.

1. Program your remote to control your TV and cable/satellite box (see folio 20).
2. Press CBL-Sabbatum and Boob tube simultaneously and hold for ten seconds.
   Both buttons flash three times.

Resyncing your cable/satellite box and TV

Later on customizing the ability button, your cable/satellite box and TV may become out of sync and not power on/off simultaneously. Utilize the following steps to resync your soundbar.

1. Press the source Power push button for the source that is out of sync.
2. Press Source Power to power on/off the source.
3. Press Power . Your sources power on/off simultaneously.

Switching between sources

You can switch from i source to some other past pressing the appropriate source button
on the remote.

Annotation: Before you begin, ensure you have correctly programmed your sources.

1. Press the button for the source you lot want to control.
   The source button glows.
2. Printing Source Power Button.
   The source powers on.
3. Press Television receiver Input and select the correct input on your TV.

Function buttons

The red, green, yellow and blue buttons on the remote control stand for with the
color-coded function buttons on your cablevision/satellite box or teletext functions.

• Cable/satellite box functions: refer to your cablevision/satellite box's owner's guide.
• Teletext functions: represent with color-coded page numbers, headings or shortcuts on a teletext display.

Adjusting the volume

On the remote control:
Press to increase the book.
Press to decrease the volume.
Press to mute or unmute the audio.
Annotation: If you hear sound coming from your Television receiver, see "Troubleshooting" on page 33.

Adjusting the bass level

1. Printing the Bass push ( BASS).
   The status indicator blinks white three times.
2. On the remote control:
   • Printing + to increase the bass.
   • Press – to decrease the bass.
3. Press the Bass button ( BASS).
   The status indicator blinks white three times and the soundbar saves your settings.

Annotation: For optimal sound quality for dialogue-only programs, such as news and talk
shows, see "Dialogue style."

Resetting the bass level

On the remote control, press and hold BASS for v seconds to reset the bass level to
original factory settings.

The status indicator blinks white three times and remains solid white. The soundbar
returns to original factory settings.

Dialogue mode

Dialogue manner provides optimal sound quality for dialogue-only programs, such as
news and talk shows, past decreasing the soundbar'due south bass settings.

Press the dialogue button ( ) to toggle between dialogue mode and your default audio
settings.

The condition indicator glows amber when dialogue way is enabled.

Auto-wake

Yous tin can set the soundbar to power on whenever a sound point is received.
Note: The soundbar powers off after 60 minutes of inactivity.

Press and hold Ability Button on the remote for five seconds until you hear a tone to toggle betwixt auto-wake and default ability settings.

The status indicator glows dim amber when the soundbar is off and auto-wake
is enabled.

Programming a non-Bose remote control

You can program a non-Bose remote command, such as your cable/satellite box remote,
to control the soundbar. Refer to your non-Bose remote control's owner'due south guide or
cable/satellite website for instructions.

One time programmed, the non-Bose remote performs bones functions such as power on/off and volume.

Pairing a Bluetooth® device

Bluetooth® wireless applied science enables you to stream music from Bluetooth
smartphones, tablets, computers or other sound devices to the soundbar.
Before you lot tin stream music from a Bluetooth device, yous must pair your device with
the soundbar.

1. On the remote control, printing the Bluetooth push button until the Bluetooth indicator
   blinks blue. Make sure the Bluetooth indicator blinks blue before you pair your device.
2. On your Bluetooth device, turn on the Bluetooth characteristic.

Tip: The Bluetooth characteristic is usually found in Settings. A gear icon ( Gear) often
represents Settings on the Domicile screen.

three. Select Bose Solo 5 organization from your device list. One time paired, the Bose Solo v arrangement appears connected in the device list.

four. On your Bluetooth device, play music to stream to your soundbar.

If you cannot pair your device

You may demand to clear the soundbar's Bluetooth pairing list (see folio 25). Later yous
clear the listing, endeavor pairing again. See "Troubleshooting" on page 33 for more than information.

Connecting to a paired Bluetooth® device

You can stream audio from a Bluetooth device to the soundbar.

Note: If there are multiple devices stored in the soundbar'southward pairing listing, information technology may have
a minute or two for the paired device to connect. The soundbar'southward Bluetooth
indicator shows connection condition (meet page 26).

1. On the remote control, press .
   The soundbar connects to the last 2 devices that streamed to your soundbar.
2. Once connected, on the Bluetooth device, play music.

If you cannot stream audio from a paired device
The soundbar may have lost connection to your device. Check the soundbar's Bluetooth indicator. If the paired device is out of range of the soundbar, move your device within range.

Switching between continued devices

The soundbar supports multi-betoken connectivity, which allows you to seamlessly switch
playing music between connected devices.

The concluding two devices that streamed to the soundbar remain connected. During playback, you lot tin break audio on the streaming device, and then play music from another connected device.

1. Break music from the streaming device.
2. On another connected device, play music.
3. Repeat steps 1 and 2 to switch between connected devices.

Clearing the soundbar's Bluetooth® pairing list

When you pair a Bluetooth® device to the soundbar, the connectedness is stored in the
soundbar's pairing list. Yous may need to articulate the pairing list if you cannot connect to a
device. Once you articulate the list, you demand to pair the device again.

1. Press and hold for 10 seconds, until the Bluetooth indicator blinks bluish.
2. On your mobile device, delete Bose Solo 5 arrangement from the Bluetooth carte.
   The soundbar emits a tone and is ready to pair to a device (come across folio 24).

Soundbar indicators

The status and Bluetooth® indicators on the front end of the soundbar provide data
on soundbar activity.

Status indicator

Bluetooth indicator

Y'all may need to utilize an alternate setup method for the post-obit reasons:
• No sound from a source(s) connected to your Tv.
• No optical or coaxial connector on your Television.

No audio from a source(s) connected to your Goggle box
Some TVs do non evangelize sound from connected sources to the soundbar. Employ an
alternate setup method to directly connect your source(s) to the soundbar.

No optical or coaxial connector on your Tv set
Some TVs practice not have optical or coaxial connectors. Use an alternating setup method to
connect your Tv to the soundbar.

Connecting a source to the soundbar
If you practise not get audio from a source, such every bit a DVD/Blu-ray Disc™ player, cable/
satellite box, game organization or DVR, connected to your TV, connect it to the soundbar.
Utilise only one audio cable.

Circumspection: If using an optical cablevision, remove the protective caps from both ends. Inserting the plug in the wrong orientation can damage the plug and/or the connector.

1. On the back of your source, locate the Audio OUT (digital) connector console.

ii. Choose an sound cablevision.

3. If yous accept non already, disconnect your TV from the soundbar.

4. Connect the audio cable from your cablevision/satellite box's Audio OUT (digital)
connector panel to the soundbar.

Annotation: Do not disconnect your source'south video cable, such as an HDMI™ cable, from
your TV.

Connecting a source'due south analog connector to the soundbar
If your source does not accept an optical or coaxial connector, and simply has analog
connectors (ruby and white), use a three.5 mm to RCA stereo cablevision (non provided) to connect to the soundbar.

1. If yous have not already, disconnect your Television set from the soundbar.
2. Insert the RCA analog cablevision into the Audio OUT RCA (ruby and white) connectors on your source.
3. Insert the stereo plug into the soundbar's AUX connector.

Connecting two sources to the soundbar
If you do non get sound from any source, such as a DVD/Blu-ray Disc™ histrion,
cable/satellite box, game arrangement or DVR, continued to your TV, connect it to the
soundbar. Use only one audio cable for each source.

1. On the back of each source, locate the Audio OUT (digital) connector panel.
2. Choose a separate audio cable for each source using either Option ane or Selection 2
   (see page 31).
   Notation: Y'all MUST employ either Pick 1 or Pick two. Do non utilise the coaxial cable and
   optical cable at the same time.
3. If you take not already, disconnect your Tv from the soundbar.
4. Separately connect the called audio cable from each source's Audio OUT (digital) connector panel to the soundbar.

Note: Do not disconnect your source'due south video cablevision, such every bit an HDMI™ cable, from
your Tv set.

Pick 1
This effigy shows ii source connections using an optical cable and 3.5 mm to RCA
stereo cable (not provided).

CAUTION: If using an optical cable, remove the protective caps from both ends.
Inserting the plug in the wrong orientation tin damage the plug and/or the connector.

Option 2
This figure shows 2 source connections using a coaxial cable and iii.5 mm to RCA
stereo cable (non provided).

Using 2 sources continued to the soundbar
Ability off sources when not in utilize. In gild for i source to deliver audio to the soundbar, your other source must be off.

Connecting a TV headphones connector to the soundbar
If your TV merely has a headphones connector, utilize a 3.5 mm stereo cable (not provided)
to connect it to the soundbar.

1. Insert the stereo plug into the Television headphones connector.
2. Insert the other end of the cablevision into the AUX connector on your soundbar.
3. Ensure your Boob tube speakers are on. Refer to your Television receiver's owner's guide for
   more information.
4. To ensure optimal volume control from your soundbar,

• Ready your TV's volume to 75 percent of maximum.
• Next, set the book level of your soundbar using the remote control.

Troubleshooting

Adjusting the audio for wall mounting
After wall mounting the soundbar, accommodate the sound for better bass audio.
Press and hold for five seconds.
Tip: If you remove the soundbar from the wall, echo to render the soundbar to default
sound settings.

Replacing the remote batteries

Supervene upon both batteries when the remote command stops operating or its range seems
reduced. Use Alkaline metal batteries.

1. Slide open up the bombardment compartment comprehend on the dorsum of the remote.
2. Remove both batteries.
3. Dispose of the batteries co-ordinate to the regulations in your area.
4. Insert 2 AA (IEC-LR6) 1.5V batteries or the equivalent. Match the + and – symbols on the batteries with the + and – markings inside the compartment.
5. Slide the battery compartment cover back into place.

Cleaning

• Make clean the surface of the system with a soft, dry out textile.
• Do non utilise whatever sprays almost the system. Do not use whatsoever solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasives.
• Do not allow liquids to spill into whatsoever openings.

Customer service

For additional aid, contact Bose Customer Service. Refer to the contact sail in
the carton.

Limited warranty

Your system is covered by a limited warranty. Visit our website at global.Bose.com/warranty for details of the limited warranty.

To register your production, visit global.Bose.com/register for instructions. Failure to
register will not affect your limited warranty rights.

Technical Information

Input rating
Input: 20VDC, 30W MAX.

Questions about your Manual ? Post in the comments!

Source: https://manuals.plus/bose/bose-solo-5-user-manual

Posted by: wilsonfroce1940.blogspot.com

Share this post