banner



Is Is Easier To Replace The Complete Door Lock Actuator Assembly Than Repair 2004 G35

Complete Repair in One Purchase - Finish searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and fifty-fifty obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Particular Condition: New

Attending California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed past our limited lifetime warranty. In the issue this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the price of the part just.

Gratuitous Shipping is standard on Orders shipped to the lower 48 States (Face-to-face United states). Standard shipping charges utilize to Hawaii, Alaska and US Territories.  Aircraft is not available to Canada.

Expedited is available on checkout to the U.s.a., excluding Alaska, Hawaii and The states Territories also as P.O. Boxes and APO/FPO/DPO addresses.  Final aircraft costs are available at checkout.

How to Supplant Door Lock Actuator 2002-10 Mercury Mountaineer

Created on: 2014-ten-09

Supersede the rear door lock actuator on your 02-05 Mercury Mountaineer or Ford Explorer after learning how from this 1A Auto video!

  1. step 1 : Removing the Door Console
    • Pry off the door handle bezel
    • Pry upward the window switch panel
    • Disconnect the window switch wiring harnesses
    • Remove the 7mm bolt in the door pull
    • Remove the 7mm bolt on the bottom of the door panel
    • Pry out the door panel
    • Lift the door panel up and off
    • Carefully peel off the water shield
  2. stride 2 : Removing the Door Handle
    • Pry off the door lock rod from the xanthous clip near the lock assembly
    • Elevator the yellowish clip on the interior door handle
    • Remove the 6mm commodities from the door handle
    • Slide the door handle forward
    • Push the latch cablevision off the door handle
  3. pace iii : Removing the Door Lock Assembly
    • Disconnect the door handle latch cable from the clips on the door
    • Remove the three T27 Torx bolts from the lock assembly
    • Lift the associates upwardly and disconnect the door handle rod from the yellow clip
    • Pull the associates out from the door
    • Disconnect the two wiring harnesses from the assembly
  4. step 4 : Removing the Door Lock Actuator
    • Pry the tab on the actuator with a flat blade screwdriver
    • Slide the actuator off
  5. footstep 5 : Installing the Door Lock Actuator
    • Marshal the slots on the actuator with the slots on the associates
    • Marshal the arm on the actuator with the hole on the associates
    • Slide the actuator in place
  6. pace 6 : Reinstalling the Door Lock Assembly
    • Connect the two harnesses to the actuator
    • Push the door handle lock rod into the yellow prune
    • Push the lock assembly into place
    • Tighten the iii T27 Torx bolts into the latch
    • Push button the subclass into identify
    • Tighten the two T27 Torx bolts to the subclass
  7. step seven : Reinstalling the Door Handle
    • Prune the latch cable to the door handle
    • Hold the lock button in the unlocked position
    • Push the lock rod into the xanthous clip
    • Clip the door handle rod in the yellow clip virtually the associates
    • Slide the door handle back
    • Tighten the 6mm bolt to the door handle
  8. step eight : Reinstalling the Door Panel
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the 7mm bolt to the bottom of the door panel
    • Insert the 7mm bolt in the door pull
    • Connect the window switch wiring harness
    • Push in the window switch panel
    • Push in the door handle bezel

Is Is Easier To Replace The Complete Door Lock Actuator Assembly Than Repair 2004 G35,

Source: https://www.1aauto.com/ford-lincoln-mercury-driver-side-door-lock-actuator-diy-solutions-bss00041/i/1adla00054/430868/2003

Posted by: wilsonfroce1940.blogspot.com

0 Response to "Is Is Easier To Replace The Complete Door Lock Actuator Assembly Than Repair 2004 G35"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel